+7 (495) 545 07 08

Black EPDM rubber sleeves for isolators

Рукава из черного каучука ЭПДМ для изоляторовChemical composition
Black sleeves are made of synthetic rubber, ethylene- propylene-diene-monomer.
Do not contain halogens.
Do not contain phthalates.
Do not contain tetramethylthiuramdisulfides.

Characteristics / Advantages
Good chemical resistance (water, oxonium, acetylhydroperoxide).
Sleeves’ parameters do not worsen at multiple sterilization and steam influence.
High resistance to ozone and UV.
Excellent dexterity and flexibility.
Antistatic.
Correspond to FDA CFR 21 § 177.2600.
Provide safe change of gloves for isolators and sterile conditions.
Reduced expenses for end users.

Fields of Application
Life sciences (pharmaceuticals and medical).

Packaging
Pair of sleeves inside reusable black pouch with layer card carton.
Marking on sleeve and packaging.

Storage advice
Storage temperature range in original packaging: from +5 °C to +25 °C.
Storage shelf life: 3 years in original packaging.
Wash with soapy water, rinse with clean water, dry at a low temperature (less than +40 °C).

Sleeve disposal
The sleeves are non-recyclable.
Classified as non-toxic waste providing they have not been contaminated during use.


Design options

Material code

Eb

Colour

Black

Inner diameter of sleeve, mm

130 / 146 / 178 / 200 / 229 / 250 / 270

Inner diameter of connector, mm

90

Length, mm

Please contact us

Thickness, mm

Rated: 0.4 (min: 0.3 — max: 0.6);
Rated: 0.6 (min: 0.4 — max: 0.8)

Bead on port side, mm

5 ±1

Bead on connector, mm

no



Physico–chemical properties

Products

Performances*

Autoclaving (+120 °C)

+ + +

Alcohols

+ + +

Acids, bases

+ + +

Strong oxidizers

+ + +

Ozone, UV, free radicals, normal aging

+ + +

Cetonic Solvents

+ + +

Chlorinated Solvents

-

Aromatic solvents and oils

-

Aliphatic solvents and aliphatic oils

-


Temperature range: from -30 °C to +120 °C

* - Not recommended
+ Applicable in some conditions
++ Applicable
+++ Excellent for operation

Mechanical properties

Young modulus at deformation 100 %(1)

Tensile strength(1)

Elongation at break(1)

Puncture resistance (0.4 mm)(2)

Electrical resistivity(3)

< 3 MPa

> 18 MPa

> 300 %

> 30 N

< 1.109 N

1ISO 37 type 2   
2EN 388
3EN 1149-1