Black Ethylene Propylene Diene Monomer (EPDM) Dry Box Gloves

Chemical composition
Black gloves are made of synthetic rubber, ethylene propylene diene monomer. Do not contain halogens, phthalates, thiurad (tetramethylthiuramdisulfide).

Characteristics / Advantages
Excellent chemical resistance (to water, oxonium, acetic hydroperoxide, nitric acid etc.).
Performances do not deteriorate in terms of multiple sterilization and influence of steam vapor.
High resistance to ozone and UV.
Excellent flexibility and dexterity.
Antistatic.
In compliance with FDA CFR 21 177.2600.

Fields of Application
Isolators for pharmaceutical industry.
III class microbiological safety boxes.
Gloveboxes for work with highly corrosive substances.
Research and engineering gloveboxes.

Packaging
Pair of gloves inside a reusable black pouch with layer card carton.
User Manual according to requirements of EU General Product Safety (CE marking) with instructions to the end user and explanations on marking on the glove and the packaging.

Storage advice
Storage condition in the original packaging must be from +5 °C to +25 °C.
Shelf life: 3 years in its original packaging.
Wash with soapy water, rinse with clean water and low temperature dry (less than +40 °C).

Glove disposal
The gloves are non-recyclable.
Classified as non-toxic waste providing they have not been contaminated during use.

Design options

Material code	Eb
Colour	Black
Inner diameter of glove box port	136, 156, 186, 220, 250, 300 and 350 mm
Hand size	Ambidextrous or left hand / right hand
Size	Depends on model
Length, mm	750-800 (±20)
Thickness, mm	Rated: 0.4 (min: 0.3 — max: 0.6); Rated: 0.6 (min: 0.4— max: 0.8)
Bead, mm	Standard: 5 ±1

Physico–chemical properties

Products	Performances*
Autoclaving (+120 °C)	+ + +
Alcohols	+ + +
Acids, bases	+ + +
Strong oxidizers	+ + +
Ozone, UV, free radicals, normal aging	+ + +
Cetonic Solvents	+ + +
Chlorinated Solvents	-
Aromatic solvents and oils	-
Aliphatic solvents and aliphatic oils	-

Temperature range: from -30 °C to +120 °C

* - Not recommended
+ Applicable in some conditions
++ Applicable
+++ Excellent for operation

Mechanical properties

Young modulus at deformation 100 %(1)	Tensile strength(1)	Elongation at break(1)	Puncture resistance (0.4 mm)(2)	Electrical resistivity(3)
< 2.5 MPa	> 18 MPa	> 400 %	> 20 N	< 1.109 Оhm

¹ISO 37 type 2   
²EN 388
³EN 1149-1

In compliance with European Personal Safety Equipment Directive