+7 (495) 545 07 08

Chlorosulphonated Polyethylene (CSM) Dry Box Gloves

Chlorosulphonated Polyethylene (CSM) Dry Box GlovesChemical composition
Gloves are made of chlorosulphonated polyethylene (hypalon, CSM)

Characteristics / Advantages
Excellent chemical resistance.
High resistance to ozone and UV.
Excellent flexibility and dexterity.
Excellent resistance to ionizing radiation.
Excellent resistance to sterilizing agents (vaporous hydrogen peroxide) and sterilization processes gamma and beta radiation).

Fields of Application
Nuclear industry.
Isolators for pharmaceutical industry.
III class microbiological safety boxes.

Supply options
Can be delivered decontaminated or decontaminated-sterile (Gamma ray sterilisation).

Pair of gloves inside a reusable black pouch with layer card carton.
User Manual according to requirements of EU General Product Safety (CE marking) with instructions to the end user and explanations on marking on the glove and the packaging.

Storage advice
Storage condition in the original packaging must be from +5 °C to +25 °C.
Shelf life: 3 years in its original packaging.
Wash with soapy water, rinse with clean water and low temperature dry (less than +40 °C).

Glove disposal
The gloves are non-recyclable.
Classified as non-toxic waste providing they have not been contaminated during use.

Design options

Material code




Inner diameter of glove box port

136, 156, 186, 220, 330 and 350 mm

Hand size

Ambidextrous or left hand / right hand


Depends on model

Length, mm

750-800 (±20)

Thickness, mm

Rated: 0.4 (min: 0.3 — max: 0.6); or
Rated: 0.6 (min: 0.4 — max: 0.8)

Bead, mm

Standard: 5 ±1

Physico–chemical properties



Autoclaving (+120 °C)



+ + +

Acids, bases

+ + +

Strong oxidizers

+ + +

Ozone, UV, free radicals, normal aging

+ + +

Cetonic Solvents


Chlorinated Solvents


Aromatic solvents and oils


Aliphatic solvents and aliphatic oils


Temperature range: from -20 °C to +120 °C

* - Not recommended
+ Applicable in some conditions
++ Applicable
+++ Excellent for operation

Mechanical properties

Young modulus at deformation 100 %(1)

Tensile strength(1)

Elongation at break(1)

Puncture resistance (0.4 mm)(2)

< 3 MPa

> 18 MPa

> 300 %

> 30 N

1ISO 37 type 2   
2EN 388