Chlorosulphonated polyethylene (hypalon, CSM) sleeves for isolators
Chemical composition
Sleeves are made of chlorosulphonated polyethylene (CSM, hypalon).
Characteristics / Advantages
Excellent chemical resistance.
High resistance to ozone and UV.
Good elasticity.
Excellent resistance to ionizing radiation.
Excellent resistance to sterilizing agents (hydrogen peroxide) and sterilization processes (gamma- and beta-radiation).
Provide safe change of gloves for isolators and sterile conditions.
Reduced expenses for end users.
Fields of Application
Life sciences (pharmaceuticals and medical).
Supply options
Can be delivered decontaminated or decontaminated-sterile (Gamma ray sterilization).
Can be delivered with O-ring on the connector.
Packaging
Pair of sleeves inside a black pouch.
Marking on sleeve and packaging.
Storage advice
Storage temperature range in original packaging: from +5 °C to +25 °C.
Storage shelf life: 3 years in original packaging.
Wash with soapy water, rinse with clean water, dry at a low temperature (less than +40 °C).
Sleeve disposal
The sleeves are non-recyclable.
Classified as non-toxic waste providing they have not been contaminated during use.
|
Material code |
Y |
|
Colour |
White |
|
Inner diameter of sleeve, mm |
130 / 146 / 178 / 200 / 229 / 250 / 270 |
|
Inner diameter of connector, mm |
90 |
|
Length, mm |
Please contact us |
|
Thickness, mm |
Rated: 0.4 (min: 0.3 — max: 0.6); |
|
Bead on port side, mm |
5 ±1 |
|
Bead on connector, mm |
5 ±1 (by order) |
|
Products |
Performances* |
|
Autoclaving (+120 °C) |
+ |
|
Alcohols |
+ + + |
|
Acids, bases |
+ + + |
|
Strong oxidizers |
+ + + |
|
Ozone, UV, free radicals, normal aging |
+ + + |
|
Cetonic Solvents |
- |
|
Chlorinated Solvents |
- |
|
Aromatic solvents and oils |
- |
|
Aliphatic solvents and aliphatic oils |
+ |
Temperature range: from -20 °C to +120 °C
* - Not recommended
+ Applicable in some conditions
++ Applicable
+++ Excellent for operation
|
Young modulus at deformation 100 %(1) |
Tensile strength(1) |
Elongation at break(1) |
Puncture resistance (0.6 mm)(2) |
|
< 3 MPa |
> 18 MPa |
> 300 % |
> 30 N |
2EN 388
"Any commercial use of the materials appearing on the site without the knowledge and written permission of OOO" VILITEK "is not allowed and will be prosecuted under Russian and international laws."