+7 (495) 545 07 08

Dry box gloves manufactured in natural rubber

Dry box gloves manufactured in natural rubberChemical composition
Gloves are made of natural rubber (polyisoprene).

Characteristics / Advantages
Good behavior to acids, diluted bases and alcohols.
Very high resistance to cold conditions (up to -40 °C) in a way that does not negatively impact its characteristics.
Very good flexibility and dexterity.
Cost saving for end users.

Fields of Application
Life sciences (Pharmaceutical / Medical)
General laboratory works with gloveboxes

Supply options
Can be delivered decontaminated or decontaminated-sterile (Gamma ray sterilisation).

Pair of gloves inside a black pouch.
User Manual according to requirements of EU General Product Safety (CE marking) with instructions to the end user and explanations on marking on the glove and the packaging.

Storage advice
Storage condition in the original packaging must be between + 5 °C and + 25 °C.
Shelf life: 1 year in its original packaging.
Wash with soapy water, rinse with clean water and low temperature dry (less than +40 °C).

Glove disposal
The gloves are non-recyclable.
Classified as non-toxic waste providing they have not been contaminated during use.

Design options

Material code




Inner diameter of glove box port

136, 156, 186, 220 and 300 mm

Hand size

Ambidextrous or left hand / right hand


Depends on model

Length, mm

750-800 (±20)

Thickness, mm

Rated: 0.4 (min: 0.3 — max: 0.55);
Rated: 0.6 (min: 0.5 — max: 0.7);
Rated: 0.8 (min: 0.7 — max: 1).

Bead, mm

Standard: 6 ±1 (except in special cases)

Physico–chemical properties



Autoclaving (+120 °C)

+ +


+ +

Acids, bases

+ +

Strong oxidizers


Ozone, UV, free radicals, normal aging


Cetonic Solvents


Chlorinated Solvents


Aromatic solvents and oils


Aliphatic solvents and aliphatic oils


Temperature range: from -40 °C to +80 °C

* - Not recommended
+ Applicable in some conditions
++ Applicable
+++ Excellent for operation

Mechanical properties

Young modulus at deformation 100 %(1)

Tensile strength(1)

Elongation at break(1)

Puncture resistance (0.6 mm)(2)

< 1,5 MPa

> 20 MPa

> 500 %

> 20 N

1ISO 37 type 2   
2EN 388