+7 (495) 545 07 08

Natural rubber (latex) sleeves for isolators

Natural rubber (latex) sleeves for isolators

Chemical composition
Sleeves are made of high quality natural rubber (polyisoprene, latex).

Characteristics / Advantages
Good resistance to acids, diluted bases and alcohols.
Without affecting the characteristics, they resist very low temperature (down to -40 °C).
Excellent flexibility and dexterity.
Reduced expenses for end users.

Fields of Application
Life sciences (pharmaceuticals and medical).

Powdering
Standard version: sleeves are without powdering.
By order: powdering inside and outside.

Supply options
Can be delivered decontaminated or decontaminated-sterile (Gamma ray sterilization).
Can be delivered with O-ring on the connector.

Packaging
Pair of sleeves inside a black pouch.
Marking on sleeve and packaging.

Storage advice
Storage temperature range in original packaging: from +5 °C to +25 °C.
Storage shelf life: 1 year in original packaging.
Wash with soapy water, rinse with clean water, dry at a low temperature (less than +40 °C).

Sleeve disposal
The sleeves are non-recyclable. Classified as non-toxic waste providing they have not been contaminated during use.


Design options

Material code

H

Colour

Light

Inner diameter of sleeve, mm

130 / 146 / 172 / 190 / 230

Inner diameter of connector, mm

90

Length, mm

Please contact us

Thickness, mm

Rated: 0.4 (min: 0.3 — max: 0.5); or
Rated: 0.6 (min: 0.5 — max: 0.7);
Rated: 0.8 (min: 0.7 — max: 0.9)

Bead on port side, mm

6 ±1

Bead on connector, mm

6 ±1 (by order)



Physicochemical properties

Products

Performances*

Autoclaving (+120 °C)

+ +

Alcohols

+ +

Acids, bases

+ +

Strong oxidizers

-

Ozone, UV, free radicals, normal aging

-

Cetonic Solvents

+

Chlorinated Solvents

-

Aromatic solvents and oils

-

Aliphatic solvents and aliphatic oils

-


Temperature range: from -40 °C to +80 °C

* - Not recommended
+ Applicable in some conditions
++ Applicable
+++ Excellent for operation

Mechanical properties

Young modulus at deformation 100 %(1)

Tensile strength(1)

Elongation at break(1)

Puncture resistance (0.6 mm)(2)

< 1.5 MPa

> 20 MPa

> 500 %

> 20 N

1ISO 37 type 2   
2EN 388