+7 (495) 545 07 08

NEOPRENE® Dry Box Gloves

NEOPRENE® Dry Box GlovesChemical composition
Gloves manufactured in polychloroprene rubber.

Characteristics / Advantages
Good chemical resistance (polyvalent).
Good mechanical resistance.
Good resistance to ozone and UV.
Excellent dexterity and flexibility

Fields of Application
General laboratory works with gloveboxes.
Life sciences (pharmaceutical / medical / laboratories working with cytotoxics, refer to the User Manual).

Powdering
Available: without powder gloves.
Option: inside or outside powder.

Supply options
Can be delivered decontaminated or decontaminated-sterile (Gamma ray sterilisation).

Packaging
Pair of gloves inside a black pouch.
User Manual according to requirements of EU General Product Safety (CE marking) with instructions to the end user and explanations on marking on the glove and the packaging.

Storage advice
Storage condition in the original packaging must be from +5 °C to +25 °C.
Shelf life: 2 years in its original packaging.
Wash with soapy water, rinse with clean water and low temperature dry (less than +40 °C).

Glove disposal
The gloves are non-recyclable. Classified as non-toxic waste providing they have not been contaminated during use.


Design options

Material code

C

Colour

Black

Inner diameter of glove box port

136, 156, 186, 220 and 300 mm

Hand size

Ambidextrous or left hand / right hand

Size

Depends on model

Length, mm

750-800 (±20)

Thickness, mm

Rated: 0.4 (min: 0.3 — max: 0.55);
Rated: 0.6 (min: 0.5 — max: 0.7);
Rated: 0.8 (min: 0.7 — max: 1).

Bead, mm

Standard: 6 ±1



Physico–chemical properties

Products

Performances*

Autoclaving (+120 °C)

+ + +

Alcohols

+ +

Acids, bases

+ +

Strong oxidizers

+

Ozone, UV, free radicals, normal aging

+ +

Cetonic Solvents

+

Chlorinated Solvents

-

Aromatic solvents and oils

-

Aliphatic solvents and aliphatic oils

+ +


Temperature range: from -20 °C to +100 °C

* - Not recommended
+ Applicable in some conditions
++ Applicable
+++ Excellent for operation

Mechanical properties

Young modulus at deformation 100 %(1)

Tensile strength(1)

Elongation at break(1)

Puncture resistance (0.6 mm)(2)

< 2 MPa

> 15 MPa

> 500 %

> 20 N

1ISO 37 type 2   
2EN 388


In compliance with the European Personal Safety Equipment Directive

In compliance with the European Personal Safety Equipment Directive