+7 (495) 545 07 08

NEOPRENE® sleeves for isolators

NEOPRENE® sleeves for isolatorsChemical composition
Sleeves are made of polychloroprene rubber.

Characteristics / Advantages
Good chemical resistance (polyvalent).
Good mechanical resistance.
Good resistance to ozone and UV.
Excellent flexibility and dexterity.

Fields of Application
Nuclear industry.

Powdering
Standard version: sleeves are without powdering.
By order: powdering inside and outside.

Supply options
Can be delivered decontaminated or decontaminated-sterile (Gamma ray sterilization).

Packaging
Pair of sleeves inside a black pouch.
User Manual according to requirements of EU General Product Safety (CE marking) with instructions to the end user and explanations on marking on the sleeve and the packaging.

Storage advice
Storage temperature range in original packaging: from +5 °C to +25 °C.
Storage shelf life: 2 years in original packaging.
Wash with soapy water, rinse with clean water, dry at a low temperature (less than +40 °C).

Sleeve disposal
The sleeves are non-recyclable. Classified as non-toxic waste providing they have not been contaminated during use.


Design options

Material code

H

Colour

Light

Inner diameter of sleeve, mm

130 / 146 / 172 / 190 / 230

Inner diameter of connector, mm

90

Length, mm

Please contact us

Thickness, mm

Rated: 0.4 (min: 0.3 — max: 0.5); or
Rated: 0.6 (min: 0.5 — max: 0.7);
Rated: 0.8 (min: 0.7 — max: 0.9)

Bead on port side, mm

6 ±1

Bead on connector, mm

6 ±1 (by order)



Physicochemical properties

Products

Performances*

Autoclaving (+120 °C)

+ + +

Alcohols

+ +

Acids, bases

+ +

Strong oxidizers

+

Ozone, UV, free radicals, normal aging

+ +

Cetonic Solvents

+

Chlorinated Solvents

-

Aromatic solvents and oils

-

Aliphatic solvents and aliphatic oils

+ +


Temperature range: from -20 °C to +100 °C

* - Not recommended
+ Applicable in some conditions
++ Applicable
+++ Excellent for operation

Mechanical properties

Young modulus at deformation 100 %(1)

Tensile strength(1)

Elongation at break(1)

Puncture resistance (0.6 mm)(2)

< 1.5 MPa

> 20 MPa

> 500 %

> 20 N

1ISO 37 type 2   
2EN 388