+7 (495) 545 07 08

Polyurethane and CSM Dry Box Gloves

Polyurethane and CSM Dry Box GlovesChemical composition
Two-layer gloves are made of polyurethane and chlorosulphonated polyethylene rubber (CSM).

Characteristics / Advantages
Excellent mechanical resistance (puncture and rupture resistance).
Excellent chemical resistance.
Excellent resistance to ozone and UV.
Good flexibility and dexterity.
Moderate wear in terms of ionizing radiation influence.

Fields of Application
Nuclear industry.
Life sciences (Pharmaceutical / Medical).

Packaging
Pair of gloves inside a reusable black pouch with layer card carton.
User Manual according to requirements of EU General Product Safety (CE marking) with instructions to the end user and explanations on marking on the glove and the packaging.

Storage advice
Storage condition in the original packaging must be from +5 °C to +25 °C.
Shelf life: 3 years in its original packaging.
Wash with soapy water, rinse with clean water and low temperature dry (less than +40 °C).

Glove disposal
The gloves are non-recyclable.
Classified as non-toxic waste providing they have not been contaminated during use.


Design options

Material code

PUR/Y

Colour

Inside — blue, outside — white

Inner diameter of glove box port

136, 156, 186, 220, 300 and 350 mm

Hand size

Ambidextrous or left hand / right hand

Size

Depends on model

Length, mm

750-800 (±20)

Thickness, mm

Rated: 0.5 (min: 0.35 — max: 0.7)

Bead, mm

Standard: 5 ±1



Physico–chemical properties

Products

Performances*

Autoclaving (+120 °C)

-

Alcohols

+ + +

Acids, bases

+ + +

Strong oxidizers

+ + +

Ozone, UV, free radicals, normal aging

+ + +

Cetonic Solvents

-

Chlorinated Solvents

-

Aromatic solvents and oils

-

Aliphatic solvents and aliphatic oils

+


Temperature range: from -20 °C to +120 °C

* - Not recommended
+ Applicable in some conditions
++ Applicable
+++ Excellent for operation

Mechanical properties

Young modulus at deformation 100 %(1)

Tensile strength(1)

Elongation at break(1)

Puncture resistance
(0.6 mm)(2)

Puncture strength
(0.6 mm)(2)

< 3 MPa

> 30 MPa

> 500 %

> 60 H

> 25 H

1ISO 37 type 2   
2EN 388

In compliance with European Personal Safety Equipment Directive

In compliance with European Personal Safety Equipment Directive