- Home
- >
- Products
- >
- Gloveboxes and accessories
- >
- Gloves for gloveboxes
- >
- Sleeves for isolators
- >
- Polyurethane and CSM sleeves for isolators
Polyurethane and CSM sleeves for isolators
Chemical composition
Sleeves are two-layered: polyurethane and chlorosulphonated polyethylene (CSM).
Characteristics / Advantages
Excellent mechanical resistance (puncture and rupture resistance).
Excellent chemical resistance.
High resistance to ozone and UV.
Elasticity.
Good resistance to ionizing radiation.
Excellent resistance to sterilizing agents (hydrogen peroxide) and sterilization processes (gamma- and beta-radiation).
Provide safe change of gloves for isolators and sterile conditions.
Reduced expenses for end users.
Fields of Application
Life sciences (pharmaceuticals and medical).
Packaging
Pair of sleeves inside reusable black pouch with layer card carton.
Marking on sleeve and packaging.
Storage advice
Storage temperature range in the original packaging: from + 5 °C to + 25 °C.
Storage shelf life: 3 years in original packaging.
Wash with soapy water, rinse with clean water, dry at a low temperature (less than +40 °C).
Sleeve disposal
The sleeves are non-recyclable.
Classified as non-toxic waste providing they have not been contaminated during use.
Material code |
PUR/Y |
Colour |
Inside: blue, outside: white |
Inner diameter of sleeve, mm |
130 / 146 / 178 / 200 / 229 / 250 / 270 |
Inner diameter of connector, mm |
90 |
Length, mm |
Please contact us |
Thickness, mm |
Rated: 0.4 (min: 0.3 — max: 0.6) |
Bead on port side, mm |
5 ±1 |
Bead on connector, mm |
5 ±1 (by order) |
Products |
Performances* |
Autoclaving (+120 °C) |
- |
Alcohols |
+ + + |
Acids, bases |
+ + + |
Strong oxidizers |
+ + + |
Ozone, UV, free radicals, normal aging |
+ + + |
Cetonic Solvents |
- |
Chlorinated Solvents |
- |
Aromatic solvents and oils |
- |
Aliphatic solvents and aliphatic oils |
+ |
Temperature range: from -30 °C to +120 °C
* - Not recommended
+ Applicable in some conditions
++ Applicable
+++ Excellent for operation
Young modulus at deformation 100 %(1) |
Tensile strength(1) |
Elongation at break(1) |
Puncture resistance |
Rupture resistance |
< 3 MPa |
> 30 MPa |
> 500 % |
> 60 N |
< 25 N |
2EN 388